Render Insulation
Coverock R90
Coverock R90 product is a type of stone mineral wool that is specifically designed for use in External Wall Insulation (EWI) systems. It provides excellent thermal insulation, and once installed, it is well-suited for receiving both hand-applied and machine-applied, mesh-reinforced render systems.
In addition to its EWI applications, Coverock R90 can also be used for internal and external insulation of buildings, providing effective protection against heat loss, noise pollution, and fire protection. Notably, this product is classified as an A1 non-combustible material, which makes it a safe and reliable choice for a range of building insulation needs.
Product features
- Good insulation parameters of Coverock stone mineral wool make the insulated rooms warm in winter and do not overheat in summer ( λD = 0,035 W/m· K ).
- By using Coverock R90 it contributes to significant savings and environmental protection by reducing energy consumption and carbon dioxide emissions to the atmosphere . Coverock R90 is renewable and an eco-friendly product.
- High level of water vapor diffusion, will avoid the formation of moisture and provide fresh air in the rooms.
- Resistance to fire , biological (rodents, fungi), chemical and mechanical factors make Coverock R90 guarantee the preservation of properties and integrity of the insulation during many years of operation.
Applications
- external and partition walls insulated by ETICS system
- external monolithic, prefabricated and brick walls
- floors above garages, passages and basements
- fire insulation of attics (reaction to fire classification A1)
Applications
External monolithic, prefabricated and brick walls
Fire insulation of attics (reaction to fire classification A1)
(with White windproof lining)
(with black windproof lining)
Specifications
Lambda thermal conductivity coefficient λD
0.035W/mK
Product code:
MW-EN13162-T5-DS(70.90)-CS(10)20-TR10-WS-WL(P)-MU1 (30mm-99mm) MW-EN13162-T5-DS(70.90)-CS(10)30-TR10-WS-WL(P)-MU1(100mm-220mm) MW-EN13162-T5-DS(70.90)-CS(10)20-TR10-WS-WL(P)-MU1 (221mm-250mm) /mK
Compliance :
PL-EN 13162+A1:2015-04
Density ϱ
90 kg / m3
Reaction to fire
A1 Euroclass(PN-EN 13501-1:2019-02 )
Compressive stress at 10% relative deformation
20 kPa (d = 30-99 mm)
30 kPa (d = 100-220 mm)
20 kPa (d = 221-250 mm)
Tensile strength perpendicular to the faces
≥10 kPa (d = 30-99 mm)
≥10 kPa (d = 100-220 mm)
≥ 10 kPa (d = 221-250 mm)
Available thicknesses in mm
30-250 mm